ktktkt

原帖由 dino_lo 于 2007-6-29 23:33 发表
I will try with J1 and PS change to other position again with LCD_INFO again.


1.  I can try the PS tie high or tie low to see the parallel ,serial mode
2  .for J1 (MI) only affect in the para ...

I think we made a big mistake at the very begining. My new finding is:
pin3 is for controlling 6800 (when High), 8080 (when GND),
J1 is for parallel (when high), and serial (when GND)

So I made pin3 GND, J1 high, I can drive it in 8080 parallel mode.
And you made pin 3 GND, J1 low, and can drive it in serial mode.

I just tried:
pin 3 HIGH, and J1 high, and my 6800 parallel mode driver works!

I guess: if you make pin3 HIGH, and J1 low, you can drive it in serial mode (because pin3 actually don't bother)

dino_lo

我会话, 才35元, 咁睇就会唔介意了.

3K

系喎  , 有无人整左个 demo 板呀 ?
我想知用咩software 转一段 动画GIF , 做 HEX

5dollar

多谢dino_lo兄同 ktktkt 兄既资料,
我都成功用lcdhype推到.

另外个controller 好似唔系KS0713, 而系台湾NT7502/NT7532, 不过功能差不多.
网上搜过, 以上芯片同sed1565 唔系100%相容, 有少数command 有分别.

winglim7

原帖由 3K 于 2007-6-30 17:53 发表
系喎  , 有无人整左个 demo 板呀 ?
我想知用咩software 转一段 动画GIF , 做 HEX

demo 板????/

KSC

原帖由 3K 于 2007-6-30 17:53 发表
系喎  , 有无人整左个 demo 板呀 ?
我想知用咩software 转一段 动画GIF , 做 HEX

都无原装个C/asm档，有先知它系点入
要做个图==>hex出来唔难,我可以写个program出来

ktktkt

原帖由 5dollar 于 2007-7-1 20:54 发表
多谢dino_lo兄同 ktktkt 兄既资料,
我都成功用lcdhype推到.

另外个controller 好似唔系KS0713, 而系台湾NT7502/NT7532, 不过功能差不多.
网上搜过, 以上芯片同sed1565 唔系100%相容, 有少数command 有分别.

Which commands, can you identify?

5dollar

haven't studied the datasheets but found some info here

http://www.crystalfontz.com/forum/showthread.php?t=4808

MCLL

今日都买了一个来玩玩, 不过其他没太多时间, 等一下子先...

阿死

合众人之力, 一定成功