本帖最后由 wklie 于 2024-5-25 22:55 编辑
如前文所述,我的 AX86U Zaku 在使用 3 年多后完全报销了 因此我换成了 TUF Pro BE6500 WiFi 7 (不含 6GHz) 中国版。
价格:769 元人民币 减 AlipayHK 折扣
香港送货:自取免运费
Factory firmware 版本:3.0.0.6.102_54528
评测 firmware 版本:3.0.0.6.102_54701
与其重复众多评测的常见资讯, 我只想分享一些我在设置使用几小时后的观察。
开机时会弹出简体中文的最终用户许可协议 (EULA), 然后是隐私协议, 此时仍无法切换至英文。这些协议大致与 Asus Router app 相似, 唯一不同的是Android app 提到了 Google Firebase SDK, 而路由器 firmware 则提到了百度云 SDK。仅在接受两份协议后, 才能切换至英文界面。
没有 Instant Guard VPN。选单上只有 WireGuard、IPsec、OpenVPN 和 PPTP。
仅有两个可选的 WiFi 区域设置 - 中国(预设)和澳大利亚。
我看到一篇评测提到无法在启用 MLO 的情况下使用 2.4GHz IoT 网络, 但我的格力 WiFi 空调 (802.11b/g)却可以正常工作。启用 MLO 会自动强制执行某些 WiFi 设置和 Smart Connect。
修改 WiFi / MLO 设置并等待 setting applied 后, Web UI 仍会暂时 hang。
由于我没有 2.5G 网络设备, 更没有 2.5Gbps 的宽频, 所以无法测试其性能。以下是从 CMHK (租 HKBN) 1000M 宽频到 小米 14 (HK 1.0.11.0.UNCMIXM) 的约 20 次 WiFi 7 测试中的最佳结果:

As mentioned in a previous post, my AX86U Zaku is completely dead a little after more than 3 years. So it is replaced by TUF Pro BE6500 WiFi 7 (without 6GHz) China version.
Price: RMB769 - AlipayHK discounts
Shipping to HK: free for pickup
Factory firmware: 3.0.0.6.102_54528
Review firmware: 3.0.0.6.102_54701
Rather than repeating the common info from the various reviews, I'll just say a few things that I observed after setting it up for a few hours.
It boots up with a prompt for accepting End User License Agreement in simplified Chinese only. Then it prompts for privacy agreement, again in simplified Chinese only. At this time it still cannot be set to English. The agreements are mostly similar to the Asus router app, with one special difference. The Android app mentions Google Firebase SDK, but the router firmware mentions Baidu Cloud SDK. Only after accepting the two agreements can it be switched to English language. There is no other language that can be chosen.
There is no Instant Guard VPN. The menu only lists WireGuard, IPsec, OpenVPN, PPTP.
There are only two possible WiFi region settings - China (default) and Australia.
I read a review about not being able to get IoT network 2.4GHz to work with MLO enabled - but this works for me with my Gree WiFi air conditioner (802.11b/g). Note that enabling MLO automatically forces some WiFi settings and Smart Connect.
After changing some WiFi / MLO settings and waiting for it to be applied and the web UI shows up again, the UI still hangs for a little while.
I have no 2.5G network equipment let alone 2.5Gbps internet, so I cannot measure how well it works. This is the best result of about 20 WiFi 7 test runs from CMHK (rented from HKBN) 1000M broadband to Xiaomi 14 (HK global 1.0.11.0.UNCMIXM):
 |