dsr-1000n 1.06B11 正式firmware #70有1.06b13 beta

本帖最后由 fatau 于 2012-3-21 21:41 编辑

1.06B11官方下载或者去http://tsd.dlink.com.tw/搵

Important Notes:
1. The v1.06B11 is a very IMPORTANT firmware update. It involves memory optimization to
improve system performance as well as accommodate more services applications in the
future. This release is a Mandatory installation for further firmware upgrade in the future.
Without this prerequisite release and directly jump to later firmware version, DSR-1000/500
router series will show warning message about image file corruption on firmware installation
page to reject firmware upgrade procedure.
2. From firmware v1.04B58 and later, all DSR routers with WW version are not allowed to install
RU firmware image in order to prevent unnecessary misunderstanding for customers.
3. For DSR-1000N 3G feature, it needs to enable and define the type of USB device on the USB
Settings page before 3G USB modem can be used.
4. Before plug DWM-152/156 3G USB dongle in DSR-1000/1000N, please make sure the SIM
Card is Not set PIN code.
5. Microsoft Windows XP has some well-known limitation to access USB storage of DSR router,
D-Link provides a Registry Script file named: WinXP.reg which can solve limitation of Windows
XP environment. Without applying this script file, it cannot copy file from Windows XP to USB
storage. (This issue will not happen when copy file from USB storage to Windows XP)
6. After firmware 1.04B58, new user database architecture is introduced. The new user database
is easier to setup and more intuitively to use. When users upgrade DSR’s firmware to 1.04B58
or later, DSR will automatically merge users in the old database into the new one. However,
new created users, firewall rules and application rules would be SWEPT AWAY and ONLY users,
firewall rules and application rules being configured in the previous firmware will be kept when
users downgrade firmware from 1.04B58 to the older one, e.g. 1.03B43. Please keep in mind:
backup your configure file for further recovery once you decide to downgrade firmware to the
Unified Services Router Release Notes
3
older version.
7. For any abnormal upgrade, i.e. upgrade from a newer version to an older one, it will take more
time to restart system comparing to normal upgrade, i.e. upgrade from an older version to a
newer one. If you MUST execute abnormal upgrade for your own reasons, please allow DSR
more time to reboot system. We will suggest you waiting for 3 minutes for this case.

New Features

1.06B11_WW 1. Support basic OSPFv3 functionality on IPv4.
2. New USB 3G dongles support: Huawei E1550 and E173. (DSR-1000N/1000
only)
3. Support VLAN-based access control on USB shared point.
4. Support Russia dual access PPPoE.
5. Support Wireless Distribution System (WDS). This feature is Only guaranteed
to work between DSR routers of same model. For example, between two
DSR-1000N, or between two DSR-500N. A max of 4 WDS peers can be
specified, more detail please refer to the DSR user manual v1.05.
Note: Using same firmware version between two DSR routers for WDS feature is strongly
recommended.
6. Firewall rules enhancement: support IPv6 firewall rules, allow users to select
designate ports other than a sequent IP range, and allow users to select both
TCP and UDP in one firewall rule.
7. Support IGMP control package forwarding from WAN to LAN.
8. Reduce WAN failover time to 1 minute.
9. Support IPv4 DHCP relay through IPSec VPN tunnels.
10. Support Captive Portal authentication through external RADIUS server.
11. Allow both HTTP and HTTPS connections to the Captive Portal Login page.
12. Support bandwidth management on the “inbound” traffic.
13. Add a new option, threshold configuration, in the Block UDP flood settings.

Problems Fixed

1. Reserved IP should be outside of the DHCP IP pool range: a user will not be
allowed assign a static IP that is in the DHCP IP pool.
2. Spillover is not working between PPPoE.
3. PPTP compatibility issues with Android phones in the encryption mode.
4. Need to remove "ANY" Service from Bandwidth traffic selectors services
options: to avoid users’ confusion when configuring bandwidth control.
5. Dash board show blank page after running heavy traffic.
6. LAN side VLC Receiver does not receive multicast traffic from VLC sender.
7. Firewall has the highest priority than content filtering ->approved URL: Now
white/black list owns the highest priority.
8. Unable to send the Email logs to the SMTP server present in LAN side of the
device.
9. DSR web GUI can’t be accessed remotely through tunnel.
10. Device is still using old certificates to access the web GUI after uploading
new VeriSign-signed certificates.
11. Unable to do Netbios from PPTP and L2TP Clients.
Unified Services Router Release Notes
7
12. LAN reserved ip's page got missed in I.E browsers if we set IE’s languages
to French.
13. PPTP connection is using MAC of WAN PHYs as gateway.